Skene Design


... turning ideas into innovative products


European License Plate Bracket

Skene Design European license plate bracket The European bracket allows you to mount the standard 110mm high European license plate frame to the underside of the front bumper.

The two brackets can be spaced any distance apart to fit a typical European license plate frame, as shown below. The attachment points on the bracket are spaced vertically to fit the standard European frame bolt locations. Both the height and the angle of the bracket can be adjusted.

The vertical and horizontal sections are aluminum and the mounting hardware is stainless steel.

Note: We do not provide the frame, only the bracket that supports the frame.


Skene Design European license plate bracket
Front view of typical European plate frame mounted with European bracket - high position

Skene Design license plate bracket
European frame mounted with bracket - low position

Designed and manufactured in the USA
© 2017 Skene & Calvert, LLC