Intelligent Lights for the Intelligent RiderTM
Installation photos for a BMW 650GS
This bike has no front fender screws, and only one brake caliper, so the standard brackets cannot be used. Instead, the Photon Blasters were mounted to the optional engine guard.
| Closeup of the Photon Blaster LED module mounted on the left engine guard, using a 5/8 hose clamp attached directly to the LED module. |
 |
|
|
|
| Power is taken from the parking light connection. Connect the Black wire from the Photon Blaster control module to the Brown wire on the parking light. Connect the Red wire from the Photon Blaster control module to the Blue/Grey wire on the parking light using the included Posi-Tap connectors. The low current draw of the Photon Blaster has no impact on the bike's electrical system, and as the lights are designed to be on all the time, no switch is necessary. |
 |
|
|
|
| Front view of the installed lights. |
 |